Difference between revisions of "Vann's Biped"

From CHS Sigma
Jump to: navigation, search
(Created page with "=Overview=")
 
(Prototype)
(3 intermediate revisions by one user not shown)
Line 1: Line 1:
 
=Overview=
 
=Overview=
 +
I made this project by myself throughout August. I bought components through Amazon (make sure there is documentation for ANY components you buy, Amazon is a toss-up if it is not made clear) for high-ish prices. You pay a slight premium on Amazon because it's Amazon and you don't order in bulk. The CAD was done with Solidworks. I used the Ender 3 3-D printer to print the designs. As of writing, I have only printed the prototype. It took ~17 hrs to print and cost $2.63. The cost was low because I printed in PLA only. The printer costs about $200 and has one of the best prices to performance ratios for a hobby machine.
 +
 +
==Prototype==
 +
The main purpose of the
 +
===Overview===
 +
===Code===
 +
===CAD===

Revision as of 16:54, 11 August 2019

Overview

I made this project by myself throughout August. I bought components through Amazon (make sure there is documentation for ANY components you buy, Amazon is a toss-up if it is not made clear) for high-ish prices. You pay a slight premium on Amazon because it's Amazon and you don't order in bulk. The CAD was done with Solidworks. I used the Ender 3 3-D printer to print the designs. As of writing, I have only printed the prototype. It took ~17 hrs to print and cost $2.63. The cost was low because I printed in PLA only. The printer costs about $200 and has one of the best prices to performance ratios for a hobby machine.

Prototype

The main purpose of the

Overview

Code

CAD